![FORD F-150/Raptor Bluetooth Flex Fuel Kit for the 3.5L EcoBoost](http://fuel-it.com/cdn/shop/products/fuel-it-flex-fuel-ford-raptor-f150-ecoboost.jpg?v=1634850690&width=1445)
![Fuel-It FLEX FUEL KIT for FORD F-150/Raptor 3.5L ECOBOOST - Burger Motorsports](http://fuel-it.com/cdn/shop/products/FF_Kit_with_BG__07655.1539279855.1280.1280.jpg?v=1634850690&width=1445)
![Fuel-It FLEX FUEL KIT for FORD F-150/Raptor 3.5L ECOBOOST - Burger Motorsports](http://fuel-it.com/cdn/shop/products/Stock_line_diagram__03517.1539281182.1280.1280.jpg?v=1634850690&width=1445)
![Fuel-It FLEX FUEL KIT for FORD F-150/Raptor 3.5L ECOBOOST - Burger Motorsports](http://fuel-it.com/cdn/shop/products/line_comparison__09093.1539281632.1280.1280.jpg?v=1634850690&width=1445)
![FORD F-150/Raptor Bluetooth Flex Fuel Kit for the 3.5L EcoBoost](http://fuel-it.com/cdn/shop/products/fuel-it-and-jb4-app-flex-fuel-e85_4106fbdf-3794-434e-b2cc-52c4fbeae81e.jpg?v=1660773313&width=1445)
Know your exact ethanol content in real-time via the Fuel-It! or JB4 app on your smartphone or tablet.
If you're running E85 or ethanol mixes in your F-150, you need this kit!
This is a complete plug and play kit to install a Bluetooth ethanol sensor in your F-150/Raptor 3.5L Ecoboost in about 30 minutes. (Check compatibility for your platform below)
The kit includes the following:
- New 3/8" E85 compatible fuel line with integrated ethanol sensor
- Genuine Continental ethanol sensor
- Fuel-It! Bluetooth analyzer
- 13' remote harness
- 3' wiring harness
-
Includes both Bluetooth App & 5v analog output for JB4 or flash tuning
- Bluetooth (iPhone or Android app must be downloaded to use this feature)
- If you are using an Apple product the app can be found by clicking here
- If you are using an Android product the app can be found by clicking here
This kit is compatible with the following
- 2017+ Ford Raptor 3.5L
-
2014+ Ford F-150 3.5L
*For the Ford JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input.
*If you aren't sure whether this kit fits your vehicle, this part is a plug and play replacement for Ford part #9j280. Visit https://parts.ford.com/shop/en/us/shop-parts, enter your VIN #, and do a part number search for 9j280, verify the part looks like the stock part displayed in this listing. Email orders@fuel-it.com with additional questions.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.